Controller for electromechanical fuel dispensers is intended to be used in connection with a POS system or a cash register to provide direct control over operation of electronic and mechanical fuel dispensers by controlling dispenser’s internal resources: motor, pulse sensor, nozzle, slowdown valve. One controller can control up 8 nozzles of fuel delivery dispensers.
TECHNICAL CHARACTERISTICS:
Electrical specification:
| Voltage |
220 V AC (+10|-15)% |
| Power consumption |
10 VA max |
| Temperature range |
-30°C ÷ +60°C |
| Weight |
4 kg |
| Overall dimensions |
390 x 295 x 120 mm |
Specification:
| Interface |
- RS-232,
- RS-485 (half-duplex),
- RS-485 (full-duplex),
- RS-485 (half-duplex with control over RTS) (used for PTS controller over fuel dispensers and ATG systems for petrol stations)
|
| Input exchange protocol |
TiT UniPump (TECHNOTRADE company private protocol) |
Quantity of connected dispensing nozzles
|
(1 … 8) |
Control
|
1 controller can simultaneously control over 8 nozzles of delivery
dispensers:
- switching on/off of pump’s motor for each nozzle (1 … 8)
- switching on/off of slowdown valves for each nozzle
(1 … 8)
|
Signals received
|
1 controller can receive signals from:
- pulse sensors (data 1, data 2) for each nozzle (1 … 8)
- nozzle take up/down for each nozzle (1 … 8)
|
Maximal ordered and
dispensed doze
|
9999,99 liters |
CONNECTION SCHEME:
Click on picture to enlarge
Controller over electromechanical fuel dispensers
(small version)
Controller for electromechanical fuel dispensers is intended to be used in connection with a POS system or a cash register to provide direct control over operation of electronic and mechanical fuel dispensers by controlling dispenser’s internal resources: motor, pulse sensor, nozzle, slowdown valve. One controller can control up 4 nozzles of fuel delivery dispensers.
Click on picture to enlarge
TECHNICAL CHARACTERISTICS:
Electrical specification:
| Voltage |
+12 V DC |
| Power consumption |
300 mA max |
| Temperature range |
-30°C ÷ +60°C |
| Weight |
500 g |
| Overall dimensions |
165 x 120 x 20 mm |
Specification:
| Interface |
- RS-232,
- RS-485 (half-duplex),
- RS-485 (full-duplex),
- RS-485 (half-duplex with control over RTS) (used for PTS controller over fuel dispensers and ATG systems for petrol stations)
|
| Input exchange protocol |
TiT UniPump (TECHNOTRADE LTD company private protocol) |
Quantity of connected dispensing nozzles
|
(1 … 4) |
Control
|
1 controller can simultaneously control over 8 nozzles of delivery
dispensers:
- switching on/off of pump’s motor for each nozzle (1 … 4)
- switching on/off of slowdown valves for each nozzle
(1 … 4)
|
Signals received
|
1 controller can receive signals from:
- pulse sensors (data 1, data 2) for each nozzle (1 … 4)
- nozzle take up/down for each nozzle (1 … 4)
|
Maximal ordered and
dispensed doze
|
9999,99 liters |